Setup uses edit to build units. Stupid idea, because that misses unit
initialization normally done by build, directly or via
unit_wipe_orders(). Use build instead.
Changes test output harmlessly: ship xbuilt, ybuilt go from 0,0 to the
building sector, ship#0's builder goes from 98 to 0, all ships'
cargostart and cargoend go from 0 to -1, jhb range from 0 to 35, and
land unit retreat percentage from 0 to 42.
Setup no longer needs country 98. Drop it.
Setup no longer copies 2,0 to 0,0 messing up its distribution center.
Harmless.
Setup doesn't need POGO's tech level anymore, so don't set it to 400.
Nukes are now built at their required tech level. Also harmless.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Let deities build in any sector. If the deity's tech level is too
low, use the required tech level instead. Don't require or use
materials, work or money. Bridge spans still require support.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
bridgefall: Fix loss of bridge support with EASY_BRIDGES off
With EASY_BRIDGES off, bridge spans need to be next to a bridge tower
or a bridge head that is at least 20% efficient to remain standing.
When a bridge tower or head gets damaged below 20%, adjacent spans may
lose support. Bug: they don't fall when they're next to another
bridge head below 20%.
Has always been broken.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
bridgefall: Fix support loss with EASY_BRIDGES and BRIDGETOWERS on
With EASY_BRIDGES on, bridge spans need to be next to land or a bridge
tower to remain standing.
Land can't go away, but a bridge tower can fall. Bridge spans next to
it may lose support then. Bug: they don't fall when they lose support
that way. Fix that.
for all possible pairs of directions (i, j)
if i and j cancel out
continue
do stuff
It does it by adding direction offsets to start coordinates, and
comparing the resulting coordinates to the start coordinates. Fine,
except it neglects to normalize the resulting coordinates.
Harmless in practice, because you can get an incorrect result only
when the path goes around the world, which it can do only in a 4x2
world.
Fix it anyway, by testing "directions cancel out" directly.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
build scrap: Redo 4.2.3's fix for manufacturing military
scrap has always returned the scrapped planes' full crew, regardless
of efficiency. build, however, charged only 10%. If you built ten
planes with one crew each, you used up one military. Or none, if you
abused random rounding. If you scrapped them again, you got ten back.
Pretty pricey way to manufacture military, but wrong all the same.
4.2.3 plugged this hole by making build never round military to zero.
Ugly special case, and not documented. Also doesn't prevent abuse of
random rounding for planes requiring more than 10 crew, but such
planes don't exist in the stock game.
Redo this fix:
1. Make scrap return crew proportional to efficiency, randomly
rounded. Note that scrap returns only two thirds of the other
materials, rounded down. Recycling materials isn't perfect, but
recycling aircrew is.
2. Drop the special case from build: treat military just like other
materials.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
build: Report missing stuff more nicely for ship, plane, land units
If both materials and avail are missing, report missing avail instead
of materials, to avoid tempting the player to move in materials only
to discover avail is lacking, too.
Report what materials are missing instead of just "Not enough
materials". Does not yet include military for planes, but that's
next.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
build: Stop abuse of construction material random rounding
Construction materials required for building a ship, plane or land
unit are rounded randomly. Crafty players exploit this to save
materials: they put just enough materials there so that build succeeds
when it rounds down. Then they simply keep trying until it succeeds.
Planes and land units are built at 10%, so rounding happens when
materials for 100% aren't multiples of ten. If they're below ten, you
can even build without materials. In the stock game, this is the case
for linf, and many plane types.
Ships are built at 20%, so multiples of five aren't rounded. Ship
building never rounds in the stock game.
Prevent the abuse of random rounding by requiring the required
fractional amount rounded up to be present. Don't change the actual
charging of materials; that's still randomly rounded.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
tests: Don't leak telegram counters from setup into test
Moving the telegram files away isn't enough, we also have to reset
nat_tgms. actofgod/setup-POGO does it already, but fire/setup-POGO
doesn't. Do it in begin_test instead, right where the telegram files
are moved away.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
* Treaties can cover attack, assault, paradrop, board, lboard, fire,
build (s|p|l|n) and enlist, but not bomb, launch, torpedo and
enlistment centers.
* Usability is very poor. While a treaty is in effect, every player
action that violates a treaty condition triggers a prompt like this:
This action is in contravention of treaty #0 (with Curmudgeon)
Do you wish to go ahead anyway? [yn]
If you decline, the action is not executed. If you accept, it is.
In both cases, your decision is reported in the news.
You cannot get rid of these prompts until the treaty expires.
* Virtually nobody uses them.
* Virtually unused code is buggy code. There is at least one race
condition: multifire() reads the firing sector, ship or land unit
before the treaty prompt, and writes it back after, triggering a
generation oops. Any updates made by other threads while trechk()
waits for input are wiped out, triggering a seqno mismatch oops.
* The treaty prompts could confuse smart clients that aren't prepared
for them. WinACE isn't, but is reported to work anyway at least
common usage. Ron Koenderink (the WinACE maintainer) suspects there
could be a few situations where it will fail.
This feature is not earning its keep. Remove it. Drop command
treaty, consider treaty, offer treaty, xdump treaty, reject treaties.
Output of accept changed, obviously.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Two bugs. First, multifire() checks the condition only for surface
ships, not for submarines. Second, multifire() neglects to write back
the ship after retreating it. The player is told the ship retreats,
but it actually stays where it is.
Broken since retreat was added in Chainsaw. Previous fixes (commit 8065fe8, v4.3.1 and commit de2651e, v4.3.19) "fixed" only the
bulletin.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
fire: Check land unit guns earlier, drop useless checks
We check all necessary conditions for being able to fire before
prompting for a target. Except for land unit guns. Clean that up.
fort_fire(), shp_fire() or lnd_fire() fail only when the fort, ship or
land unit can't fire. If that happens, our checking is incomplete.
Oops then.
We recheck some of the necessary conditions after getting the target.
However, because the command fails when the firing sector, ship or
land unit has changed since the first check, these rechecks can't
fail. Drop them.
Note that the rechecks were just as useless before commit 66165f3
fixed fire to fail on change, because they rechecked the unchanged
cached copy instead of the possibly changed original.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Adding or removing a command to/from a test has unfortunate effects:
* Before the previous commit: if the command consumes pseudorandom
numbers, all subsequent users of pseudorandom numbers get different
ones. This has always been a major headache.
* Since the previous commit: all subsequent users of pseudorandom
numbers get different ones whether the command consumes any or not.
That's even worse.
* If the command uses BTUs, subsequent prompts are changed. Not
nearly as bad as the above, but still annoying.
Create a new command __cmd to allow compensating for adding/removing
commands for tests. Throw in the ability to compensate treasury
changes for good measure. Three arguments: command count, BTU use,
money use.
Usage example: say you add a convert command to a test, and it uses 3
BTUs and $15. Then you compensate by adding "__cmd added 1 3 15"
right after it.
The command must not be available unless running_test_suite is on, of
course. Make it require the new player command capability TESTING,
and give that to all players when running_test_suite is on.
The command is intentionally not documented in info. Switch
running_test_suite off for info-test, to hide it (and any future
TESTING commands) from info-test.
Suppress the command counter increment for TESTING commands, so they
can be used without upsetting pseudorandom numbers
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Tests need repeatable pseudorandom numbers to yield repeatable
results. We seed the pseudorandom number generator with a fixed value
(emp_server -R) to make it produce the same sequence of numbers every
time. But whenever code exercised by a test is changed to consume
fewer or more of them, all subsequent users get different numbers
regardless. The ensuing test result changes are extremely tedious to
review.
To address this problem, reseed the PRNG with the count of commands
right before executing a command when running_test_suite is on. This
way, the effect of perturbing the PRN sequence lasts only until the
next command.
Note that the next command could be another player's. Doesn't matter.
Adding or removing commands now upsets the PRN sequence even for
commands that don't consume PRNs. The next commit will take care of
that.
Perturbs test results across the board. Hopefully, that'll happen
much less frequently now.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
tests: Fix normalization of nat_timeused in prompt in journal
Command prompts show nat_timeused rounded down to minutes. They need
to be normalized, or else tests can fail when they take too long, or
cross midnight. Formatted prompts are normalized correctly (not
actually used since commit 9ca3fa9), but the journal contains raw
prompts. Normalize them, too.
Smoke test's journal.log is affected, because the server charges at
least 15s per login, which adds up into minutes in this test.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
tests: Normalize trailing white space in test output completely
Commit 37ff377 stripped trailing white space in test output, except
for journal.log, where it stripped it only from player output. This
misses the space preceeding player empty output, and doesn't cover
equally annoying trailing white space elsewhere, such as the space
preceeding empty input and trailing white space in prompts. Testing
the latter could be marginally useful, but let's keep things simple,
and strip all trailing white space for now.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Obviously attempts to provide space for a known configuration-
dependent stack hog. The hog went away when finish_sects()'s arrays
became dynamically allocated in 4.2.0.
Adjusting for that by dropping the extra term might well do (I observe
only a few KiB of stack used on my system). But let's set it to 512
KiB instead to be on the safe side.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Obviously attempts to provide space for known configuration-dependent
stack hogs.
The first hog is allegedly budget. Bogus since day one: its large
arrays were static in Empire 2, and became dynamically allocated in
Empire 3.
The second one makes some sense: powe() has a struct powstr[MAXNOC].
It also has an int[MAXNOC], which isn't accounted for.
Except for ridiculously small worlds, the second term is smaller, and
only the (bogus) first term matters.
Two hogs are missing: head() has a struct histstr[MAXNOC][MAXNOC], and
news() has a short[MAXNOC][MAXNOC]. It also calls head().
I looked for more hogs with "gcc -fstack-usage", and found none.
On my x86_64 system, a news command needs almost 107KiB of stack.
Only slightly less when compiled for 32 bit. Stack overrun for worlds
with fewer than some 320 sectors, thus unlikely to bite in real games.
Increase player stack size to 1 MiB. Using MAXNOC to size the stack
isn't worth the trouble.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Normally, git's pre-commit hook protects us from them. However, when
expected test output contains trailing white space, we have to bypass
commit hooks. Unwanted space can then slip in if you don't pay
attention. I obviously didn't; clean up.
The previous commit should reduce the need for such hook suppression.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
tests: New helper function feed_input, for comment support
feed_input drops lines starting with a bar character '|', so they can
serve as comments. Syntax chosen because such lines shouldn't be
needed in tests. In particular, the server already ignores such lines
when it reads commands, because they get parsed as empty command with
a pipeline, and empty commands get ignored, regardless of
redirections.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Units owned by POGO are not in use. Giving a unit to POGO destroys
it. The opposite doesn't work, however: the unit prewrite hooks give
it right back to POGO, because efficiency is below the minimum. Make
it work by also increasing efficiency to minimum.
Note that you can't use this to create a unit that doesn't already
exist in the respective file. That's because edit's second argument
selects from existing objects only.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Blow away $(einfodir) and $(ehtmldir). Without this, formatted pages
can linger after page removal. Matters, because info.c searches
$(einfodir) rather than the index $(einfodir)/all. Same for web
servers and $(ehtmldir).
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
SO_KEEPALIVE isn't useless with long idle timeouts. Before v4.3.30's
idle timeout changes, such long timeouts had serious drawbacks (easy
denial of service), but they're just fine since then.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
projects / empserver / log