prod() duplicates the update's sector production code, except it
computes both output with present materials ("make" output) and output
not limited by lack of materials or production backlog ("max" output).
It also rounds materials consumed up instead of randomly.
Factor prod_output() out of produce() for reuse by prod(). prod()
runs it twice: once for "make" output and once for "max" output.
Test output changes are due to random rounding.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Sector production computes a number of intermediate values, and rounds
many of them. We've tinkered with the rounding a few times. It
currently works as follows.
There are two production efficiencies, both shown by the production
command: sector p.e. (column eff) governs how efficiently work is
converted to units of production, and p.e. (column p.e.) governs how
much product each unit of production yields.
Production is limited by available work, materials and resource
contents. These limits are all rounded down.
Example: if a unit takes 16 work (tech or guns), then 600 work at 100%
sector p.e. can make at most 37 units, rounded down from 600 * 100% /
16 = 37.5. 76 work at 76% sector p.e. can make 3, rounded down from
76 * 76% / 16 = 3.61.
Output is units times p.e. Level output isn't rounded. Item output
is rounded down.
Example: a tech center making 37 units at p.e. 0.6 (edu=20) yields 37
* 0.6 = 22.2 tech (before tech log). 3 units yield 1.8 tech.
Example: a defense plant making 37 units at p.e. 0.6 (tech 35) yields
22 guns (rounded down from 22.2). 3 units yield 1.8g, randomly
rounded.
If item output needs to be adjusted downward (production backlog), the
number of units made is likewise adjusted. It is rounded randomly.
Example: a 100% refinery with 156 work can make 156 units. Its
p.e. at tech 30 is 5.0, so this yields 780p. But if it already has
9500p, it can make only 499 more. That's 99.8 units, rounded randomly
to either 99 or 100.
Materials and money consumed are a multiple of units made. No
rounding there.
Resource depletion depends on units made and is rounded randomly.
Work consumed is units made times work per unit divided by sector
production efficiency. Rounded randomly. Any work left can normally
be used at the next update (it "rolls over").
Example: the tech center making 37 units consumes 37 * 16 / 100% = 592
work, with 8 work left. It also consumes 37d 185o 370l $11100.
Example: the tech center making 3 units consumes 3 * 16 / 76% = 63.2
work, randomly rounded to 63 or 64, with 13 or 12 work left. It also
consumes 3d 15o 30l $900.
Example: the defense plant making 3 units consumes work the same. It
additionally consumes 1o 15l 30h $30 when it makes one gun, and twice
as much when it makes two.
Rounding intermediate values like "units of production" is awkward.
It's better to round only final results. These are item output,
materials consumed, resource depletion and work consumed. Round item
output down, and the rest randomly. Don't round level output (it's a
floating-point value) and money consumed (also floating-point, since
the previous commit).
For item production, this shifts the random variations from number of
products made to materials and work consumed.
Example: the first defense plant again makes 22 guns (now rounded down
from 22.5). The second one now always makes two guns (rounded down
from 3.61 * 0.6 = 2.166) instead of 1.8 randomly rounded.
This is nice, because budget and production can now predict the number
of items made exactly. Before, budget fluctuated randomly just like
the update, and production rounded down.
Note that budget used to be even worse: until commit 6f7c93c
(v4.3.31), we rounded units of production randomly rather than down.
The 100% tech center randomly made 37 or 38 units, which is much more
relevant than random rounding of item output.
Furthermore, work is now fully used both for item and level
production, to the limit permitted by materials and resource contents.
Example: the first tech center now makes 37.5 units, yielding 37.5 *
0.6 = 22.5 tech. It consumes 37.5d 187.5o 375l $11250 and all 600
work (fractions randomly rounded).
Example: the second tech center now makes 3.61 units yielding 1.805
tech, consuming 3.61d 18.05o 36.1l $1083 and all 76 work.
The production command duplicates much of the update's sector
production code, so it needs a matching update. The next commit will
reduce the duplication.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
The update tallies income and expenses in full dollars. Each debit or
credit is rounded before it is added to the tally. Different things
are rounded differently. Examples:
* Each sector's military pay is rounded down. In the stock game, 1m
is paid $4.999998, so n mil cost n*$5 -$1, for all practical n. 10m
in one sector cost $49, but spread over ten sectors they cost only
$40.
* Total pay for military in ships and land units is rounded down.
* Each plane's military pay is rounded down (used to be rounded up
except for broke countries until recent commit 2eb08f4). In the
stock game, flight pay is 5 * $4.999998 = $24.99999. For a plane
with n mil, that's n * $25 - $1. Filed under plane maintenance, not
military payroll.
* Each sector's civilian tax is rounded. In the stock game, 1c pays
$0.499998. 10c in one sector pay $5, but spread over ten sectors
they pay nothing.
* An occupied sector's civilian tax is first rounded, then divided by
four and rounded down *boggle*.
* Each sector's uw tax is rounded. In the stock game, 1u pays
$0.106662. 1-4u in one sector pay nothing. 5-14u pay $1.
This is madness. Has always been that way.
Drop the rounding and track money in type double throughout the
update. Round only the final amount, randomly. This is similar to
how commands accumulate a money delta in player->dolcost.
Likewise, tally the subtotals for budget in type double. Display them
rounded to full dollars.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
The update simply updates each nation's nat_money as it goes. Works.
Except it doesn't update when it runs on behalf of budget. But it
still checks nat_money to determine whether the nation is solvent.
These checks are all broken. Leads to massive mispredictions when
you'd go broke or solvent during a real update.
Track money unconditionally in nat_budget[].money. Delay update of
nat_money until prod_nat(). Replace separate money[] by new
nat_budget[].start_money. Closes bug#235.
Remaining difference between budget and update in the update test:
* #1: budget mispredicts plane #100 gets built (to be fixed)
* #2: budget shows ship, plane and land unit maintenance when broke,
but update damages them instead (correct)
* #2: sector -14,0 converts, quadrupling its taxes (correct)
* #4 & #5: bank with dust and bars taken over by che (correct)
* #4: plague deaths (correct)
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
produce() and enlist store the cost through a parameter and return the
amount. Their caller produce_sect() then updates nat_budget[]
accordingly. Move the nat_budget[] update into the callees.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Extend struct budget member bm[] to cover ships, planes and land
units, too.
Plane maintenance changes because pilot pay is now consistently
rounded down. Before it was rounded down for broke countries, else
up. The stock game's pilots earn a little less than $25, and solvent
countries save $1 per plane. The rounding doesn't make much sense
either way. To be be addressed in a later commit.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
The update summarizes sector production, building and maintenance for
budget in a two-dimensional array int p_sect[SCT_BUDG_MAX+1][2]. All
references into this array use literals as second subscript. Bzzzt,
wrong data type.
Add two one-dimensional arrays to nat_budget[], one for production,
and one for building and maintenance. p_sect[i] becomes
nat_budget[cnum].prod[i] for production, and .bm[j] for building and
maintenance. p_sect[i][0] becomes .count, and -p_sect[i][1] becomes
.money.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
When we add up military payroll, we discard fractions. Payroll is
therefore lower than it should be, but I'm not fixing that now. The
number of military budget reports is actually computed from payroll,
and therefore also low.
The obvious way to fix that would be adding another out parameter to
tax() and upd_slmilcosts(). However, budget and the update track cost
and count of numerous things (sector products, unit maintenance and
building, ...), and it's time for a common way to do that.
Create struct budget_item for tracking cost and count, and struct
budget nat_budget[MAXNOC] for tracking a nation's budget. Track only
military for now; more to follow.
This fixes the military count. The cost of military remains low,
because we discard fractions exactly as before.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
update.h is a convenience header to include headers commonly needed in
update code. The price for the convenience is superfluous recompiles.
Include necessary headers directly, and drop update.h
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Call callers assign the return value to sp->sct_avail now. Move the
assignment to do_feed() and drop the return value.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
People don't work when their sector is stopped or their nation is
broke. Implemented by produce_sect() skipping the assignment of new
work returned by do_feed() to sct_avail.
This is wrong because it lets all old work roll over, ignoring
rollover_avail_max.
Broken in 4.0.0. Similarly broken for sectors disabled via zero
budget priority between a botched fix for changing sector types in
Chainsaw and the removal of budget priorities in commit 520446e,
v4.3.6.
Fix by zapping available work when the sector is stopped or its owner
is broke.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Traditionally, unused unused available work is discarded at the
update. Since commit d7a054c (v4.2.13), deities can configure (some)
unused work to "roll over", i.e. available work = some unused work +
this update's work.
Not discarding unused work reduces micromanagement incentives.
However, it also leads to unobvious behavior.
For instance, here's the obvious way to build a radar station: move in
enough people to make 200 work. Half of it is available for sector
building, and increases efficiency to 100%. Here's a not-so-obvious
way: move in enough people to make 134 work. 67 will be used to
increase efficiency to 67%. Now move your workers elsewhere. The
unused available work is enough to finish the job at the next update.
Similarly, neighbors could be surprised by sectors building bridges
despite having no visible workers.
Commit 7f4e59f (v4.2.15) let deities limit the amount rolled over:
unused work above rollover_avail_max is discarded. This became the
default with a value of 50 in commit 81a3e4c4, v4.3.31.
Limit it further so that "roll over" can increase the update's work by
no more than half, plus one. The extra point is there so that even a
tiny work force has a chance to eventually eke out the second point of
work needed to increase efficiency.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Rounding work down can lead to a bit of work micromanagement. For
instance, four military on a lonely island accomplish nothing in 60
ETU updates, but five will make one point of work per update. They
can build a 2% harbor in four updates, as long as rollover_avail_max
is at least 3. Six to eight will be no faster.
The people's work used to be rounded randomly until Empire 3's big
effort to make the update code work for budget switched to rounding it
down, perhaps accidentally.
Switch back to rounding randomly, so that players don't have to get it
exactly right. Four military now get to 2% in five updates on
average, five in four, six or seven in three, and so forth.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
buildeff() rounds work and money up. Until recently, fractions could
only occur on tear-down, but with customized costs they can now also
occur on build-up.
The previous commit changed unit building to round money and work
randomly. Before, money was rounded down, and work was rounded up.
Round them randomly for sectors as well, for consistency.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
shiprepair() limits the efficiency gain to how much the workers can
build, rounding randomly. It charges work, money and materials for
the efficiency actually gained, rounding work up, money down, and
materials randomly. Same for planerepair() and landrepair(). Has
always been that way.
If you get lucky with the random rounding, you may get a bit of extra
work done for free.
The budget command runs the update code, and can be off by one due to
different random rounding.
Sector production used to have the same issue, only more serious,
because a single unit of tech production matters much more for the
budget than a single point of unit efficiency gain. I fixed it in
commit 6f7c93c, v4.3.31.
Fix it for unit building the same way: limit efficiency gain to the
amount the workers can produce (no rounding). Work becomes a hard
limit, not subject to random fluctuations. Randomly round work and
money charged for actual gain, like we do for materials. On average,
this charges exactly the work and money that's used.
This lets budget predict how much gets built a bit more accurately.
It's still not exact, as the amount of work available for building
remains slightly random, and the build cost is randomly rounded.
The old rounding of work for ships carries the comment "I didn't use
roundavg here, because I want to penalize the player with a large
number of ships." Likewise for planes. Rounding work up rather than
randomly increases the work cost by 0.5 per ship, plane or land unit
on average. I could keep the penalty by adding 0.5 before random
rounding. Not worth it, since the effect is actually pretty trivial.
Let's examine a fairly extreme case: an airfield with 600 available
work repairing a huge number of lightly damaged planes, say f2 with
81% average efficiency. The old code lets the airfield repair roughly
600 / 6.5 = ~92 planes, the new code 600 / 6 = 100.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Traditionally, building up 100% takes 100 work. Make the work to
build configurable, via new sect-chr selector bwork, backed by new
struct dchrstr member d_bwork. Keep the required work exactly the
same for now.
Tearing down sectors remains four times easier than building.
Clients that hardcode sector build work need to be updated. Easy,
since build work is now exposed in xdump.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Sectors require lcms and hcms to build. The build materials are
exposed as sect-chr columns lcms, hcms (struct dchrstr members d_lcms,
d_hcms). They are per point per point of efficiency. In contrast,
unit build materials are defined for 100%.
We want to define build materials for 100% now, for flexibility and
consistency, and we want to optionally support more build materials in
the future. Replace d_lcms and d_hcms by array member d_mat[], and
replace selectors lcms and hcms by selectors l_build and h_build.
This is an xdump compatibility break. To provide the customary grace
period, we'd have to make selectors lcms and hcms virtual instead,
with value l_build / 100 and h_build / 100 rounded up, and deprecate
them. Deities would have to avoid l_build and h_build values that
aren't multiples of 100 for this to work fully. But we're not
bothering with maintaining xdump compatibility in this release.
Provide selectors for all other item types, to help clients prepare
for future additional materials. Use CA_DUMP_ONLY to keep them out of
configuration tables until they actually work.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Sector build cost is defined by sect-chr column build (struct dchrstr
member d_build). It's the cost per point of efficiency. In contrast,
unit build cost is defined for 100%, by ship-chr, plane-chr, land-chr,
nuke-chr column cost.
Switch sectors to cost per 100%, for flexibility and consistency:
replace struct dchrstr member d_build by d_cost, and replace selector
build by selector cost. Naming it cost for consistency with units is
possible only because the previous commit made the name available.
This is an xdump compatibility break. To provide the customary grace
period, we'd have to make selector build virtual instead, with value
bcost / 100 rounded up, and deprecate it. Deities would have to avoid
bcost values that aren't multiples of 100 for this to work fully. But
we're not bothering with maintaining xdump compatibility in this
release.
With bcost values that aren't multiple of 100, the cost of sector
building may have to be rounded. On the one hand, the cost of sector
demolition has always been rounded up. On the other hand, the cost of
producing stuff is rounded randomly. For now, round up, because
rounding randomly would affect subsequent random rounding, and upset
the smoke test.
Fortunately, show se b already shows build costs per 100%, since
commit 48ff096, v4.3.23.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
produce_sect() updates the bp map several times. This is wasteful:
since only ship, plane and land unit building reads it, bp map writes
before the last one are never read. Update it just once for every
sector.
The update for sectors that are stopped or whose owner is broke is the
only remaining use of bp_put_items(). Since available work must still
be unchanged there, we can replace it by bp_set_from_sect().
bp_get_item(), bp_put_item(), bp_get_items(), bp_get_avail() and
bp_put_avail() are now unused. Drop them.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
If player->simulation, shiprepair(), planerepair(), landrepair() must
use the bp map, and must not change game state.
Copy the sector to a scratch buffer, update it from the bp map, work
on the sector normally, then write back to the bp map. This is
simpler and safer.
Since get_materials() loses its connection to the bp map, move its
declaration out of budg.h.
While there, drop an ancient debugging logerror() from landrepair().
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Update code shared with budget uses the bp map instead of the sector,
so that budget can track materials and work available in sectors for
ship, plane and land unit building without updating the sector file.
Unfortunately, the bp map can become stale during the update.
prepare_sects() doesn't update the bp map for sea sectors, unlike
budget's calc_all(). Instead, we rely on calloc()'s initialization.
Works, but is a bit unclean.
prepare_sects() updates the bp map after fallout, but neglects to
update it for any of the later sector updates (steps 1b to 1f in info
Update-sequence). Che can destroy materials and available work, and
the plague can kill military. The bp map stays out of date until
produce_sect() updates it again.
Since we deal with sector production and countries in increasing order
of country number, foreign ships, planes and land units owned by
countries with lesser numbers get built before their sector produces.
Building uses the stale bp map then, and can use materials and
available work destroyed by che or the plague. The update test
demonstrates the former case.
For stopped sectors or when the owner is broke, produce_sect() updates
only materials in the bp map, not available work. Nothing builds in a
stopped sector, but allies may build in your sectors even when you're
broke. They can use available work destroyed by che then.
Screwed up when Empire 3 made the update code work for budget.
Note that budget bypasses the flawed code: it prepares its bp map
itself instead of calling prepare_sects().
Rather than fixing prepare_sects(), use a null bp map for the update:
writes become no-ops, and reads read from the underlying sector. Not
only does this remove the possibility of the bp map going stale during
the update, it saves a bit of memory, too.
calloc()'s initialization is now dead. Switch to malloc().
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Stopping a sector disables repairs of own ships completely. Foreign
ships, however, repair just fine, consuming the sector's materials
and, if it's a harbor, its available work.
Disable repair of all ships in stopped sectors. This is consistent
with plane and land unit repair.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
produce_sect() skips sectors without civilians, military and land
units. These are unowned. Any uw there are frozen in time: they
don't eat, procreate or produce. Has always been broken. Don't skip
such sectors.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
When the required level is too low for production, produce() returns
early. Except when simulating. Messed up when Empire 3 made the
update code work for budget.
This can make budget show level production even when it's not actually
possible. In the stock game, this can happen for tech and research,
which require education > 5.0.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
prepare_sects() caches the sector owner's getnatp() across
guerrilla(), do_plague() and populace(). This is wrong, because the
owner may change. The mistake can be traced back all the way back to
BSD Empire 1.1.
If the sector revolts or reverts to deity, the ex-owner still receives
taxes and bank interest. The update test demonstrates this bug.
If the sector revolts, we use the ex-owner's instead of the owner's
tech and research for plague, and we use the ex-owners happiness and
required happiness instead of the owner's for loyalty update and civil
unrest.
Change do_plague() and populace() to call getnatp() themselves. Call
it in prepare_sects() only after we're done messing with the sector
owner.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
This way, tax() is more focused, and populace() doesn't need to be
guarded with !player->simulation.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
We maintain a few sector invariants in sct_prewrite(). Since the
update bypasses sct_prewrite(), it needs to maintain them itself. The
two should be consistent.
The update reverts deserted sectors to deity in three places:
do_plague(), populace() and produce_sect(). None of them is
consistent with sct_prewrite().
populace() can revert unowned sectors to deity. This creates bogus
entries in the "lost" file. Harmless; messed up when the lost items
were added in 4.0.7. Visible in tests/smoke/final.xdump.
populace() fails to revert when there are only uw left. If PLAGUE is
enabled, do_plague() already reverted. Else, produce_sect() will.
This is the only case where they add value to populace(). Can be
traced back all the way to BSD Empire 1.1.
All three neglect to clear mobility. Harmless.
Fix populace()'s condition for reverting to deity, and make it clear
mobility. Drop the reverting from do_plague() and produce_sect().
populace() also resets state that applies to civilians when there are
none: work percentage, loyalty and old owner. However, it resets on
different conditions than sct_prewrite(). Messed up in Chainsaw;
before, populace() didn't reset at all.
For sectors without military, populace() fails to reset. This can
happen when the update wipes out civilians and military, say by plague
or fallout. The now bogus work percentage, loyalty and old owner
persist until sct_prewrite() runs on the next non-update sector
update. Except old owner is reset correctly by populace() when the
sector reverts to deity. It doesn't when the owner has a land unit
there.
Most of the time, this doesn't matter, as moving civilians into a
sector without civilians overwrites the sector's work percentage,
loyalty and old owner. However, airlifting and unloading civilians
fail when the old owner differs from the owner. Else they adopt the
sector's loyalty and work percentage (bug#49 and bug#255).
Fix populace() to reset any sector without civilians, like
sct_prewrite().
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
The code to build sectors got quadruplicated in Chainsaw. We've since
fixed numerous inconsistencies, but still have four copies of the
code. Thanks to the recent work on upd_buildeff(), we can now use it
to replace the other three copies. Rename it back to to buildeff()
while there.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
newe() and prod() duplicate parts of the update's do_feed(), except
they round babies down instead of randomly, to get a stable,
conservative forecast. Unlike the update, they assume sufficient
food. Inaccurate for sectors that are going to starve or have
suboptimal population growth. Not documented. Has always been that
way.
Eliminate the undocumented assumption by replacing the duplicate code
by a call of do_feed(). Add a suitable parameter to do_feed() to
preserve the different rounding.
The update test shows the improvement.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Since changing *sp is safe now, we can move the update of
sp->sct_type into upd_buildeff(), and drop the parameter.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Since changing *sp is safe now, we can move the update of
sp->sct_effic into upd_buildeff(). This frees the return value; use
it to return cost, and drop the parameter.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Since changing *sp is safe now, we can move the update of
sp->sct_avail into produce(). This frees the return value; use it to
return the amount produced. Drop the parameters.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Since changing *sp is safe now, we can move the update of
sp->sct_avail into upd_buildeff(), and drop the parameter.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Since changing *sp is safe now, we can move the update of sp->sct_work
into do_feed(), use the return value for work, and drop parameter
workp.
The sp->sct_avail update looks similar, but there's a subtle
difference: it's skipped when the sector is stopped or its owner is
broke. The caller already checks that, so leave the update there.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Since changing *sp is safe now, we can update sp->sct_effic
unconditionally, and eliminate neweff.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Since changing *sp is safe now, we can update sp->sct_work,
sp->sct_loyal, sp->sct-che unconditionally in do_feed(), and likewise
sp->sct_item and sp's resource in produce().
Output of budget in smoke test and update test changes slightly,
because it now executes more code, and the PRNs this consumes affect
random rounding.
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
