Plane flying commands first select the planes to fly the mission and
their escorts, then equip them. They all fail when no planes to fly
the mission can be equipped.
Unlike bomb and paradrop, commands drop, fly, recon and sweep had an
additional check that made them fail when no planes to fly the mission
could be selected. Because "none selected" implies "none equipped",
the additional check is redundant. Remove it.
While there, break lines in calls of pln_sel() more tastefully.
pln_arm(), pln_equip(), mission_pln_arm() mission_pln_equip() took a
mission parameter encoding the kind of sortie (strategic bomb,
pinpoint bomb, transport, ...), a flag parameter to further specify
the plane's role, and a parameter ip to specify the load.
The flags argument was always either P_F (intercept), P_F | P_ESC
(escort), or zero (any other role).
With non-zero flags, mission and ip argument were not used in any way.
Use mission 'e' and null load for escorts, and remove flags.
Intercept can still be identified by mission zero.
Also change pln_mobcost() to take a mission parameter instead of
flags, so that pln_arm() and mission_pln_arm() can simply pass on
their mission.
The ancients designed interception dead simple: when you overfly a
sector, you get intercepted by the sector owner. Fine print
interception rules govern which planes intercept.
Then complexity got piled on top of it.
Chainsaw 2 added an extra interception by surface ship owners, in the
target sector only.
Chainsaw 3 added an extra interception by land unit owners, in the
target sector only (Empire 4 later merged this extra land unit
interception with the extra surface ship interception).
Chainsaw 3 added an entirely separate kind of interception: air
defense missions. When you enter a sector in some air defense op
area, you get intercepted. Fine print air defense rules govern which
planes intercept. These rules differ significantly from the
interception fine print.
Additional complexity comes from these facts:
* Air defense mission interception happens in addition to non-mission
interception. You can boost your total interception by setting up
air defense. Which means you must set it up, or forgo an advantage.
* Air defense planes are not available for non-mission interception
duty. You need to decide on a split.
* In contrast to non-mission interception, interceptors flying air
defense get intercepted.
Moreover, the air defense code breaks one of the plane code's design
assumptions, namely that just one plane sortie is active at a time.
The air defense sortie runs while the sortie it intercepts is in
progress. This leads to two interceptions being active at the same
time: the one intercepting the original sortie, and the one
intercepting the air defense sortie. The same plane can fly in both
interceptions, and damage received in the interception of the air
defense sortie is wiped out, triggering a seqno mismatch oops.
The previous commit already simplified non-mission interception: you
get intercepted by anyone who owns the sector, or a surface ship or a
land unit there, whether it's the target sector or not.
Now simplify mission interception, by merging air defense back into
ordinary interception: when you overfly a sector, you get intercepted
by anyone who owns the sector, or a surface ship or land unit there,
or has an air defense mission covering the sector. That's all. No
multiple interceptions, no separate air defense rules.
Remove air_defense(). Simplify ac_encounter() and sam_intercept()
accordingly; both lose their last parameter.
Change sam_intercept() and ac_intercept() to intercept in mission op
areas. New parameter only_mission to suppress non-mission
interception. Pass zero when the intercepting country owns the sector
or a surface ship or land unit in the sector.
ac_encounter() can't efficiently predict whether a country intercepts,
so it needs to call ac_intercept() unconditionally. This kills the
optimization to collect interceptors only when needed; simplify
accordingly, replacing getilist() by getilists().
Since the previous two commits, ac_encounter() checks its
mission_flags argument only for proper mission flags PM_R and PM_S,
not for plane flags P_A, P_S, P_I.
This makes the code to put plane flags into mission flags useless.
Remove it from bomb(), drop(), fly(), para(), reco(),
perform_mission(), mission_pln_arm(), air_defense(), pln_arm().
Much of that code was useless even before: P_X and P_H since Chainsaw
3 option STEALTHV became mandatory in Empire 2, and P_MINE since
commit cc0c3e4f (v4.3.0) cleaned up mine drops.
A reconnaissance patrol (recon and sweep) uses sonar when ASW planes
participate. ac_encounter() enabled sonar when P_A was in
mission_flags. These get computed by pln_arm() and callers. However,
they set P_A only when *all* planes were capable, including escorts.
Fix by checking actual plane capabilities instead. Closes#1389451.
Planes normally sit in their base (sector or carrier), where they can
be spied, damaged, captured, loaded, unloaded, upgraded and so forth.
All this must not be possible while they fly. There are two kinds of
flying planes: satellites in orbit, and planes flying a sortie.
Satellites in orbit have always been marked with flag PLN_LAUNCHED.
Works. What didn't work was tracking planes flying a sortie.
If you look at one sortie in isolation, up to three groups of planes
can be flying at any point of time: the primary group, which carries
out the sortie's mission (bomb, transport, ...), their escorts, and a
group of hostile planes flying interception or air defense.
The old code attempted to track these planes by passing those groups
to the places that need to know whether a plane is flying. This was
complex and incomplete, and broke down completely for the pin-bombing
command.
It was complex, because the plane code needs to keep track of all the
call chains that can lead to a place that needs to know whether a
plane flies, and pass the groups down the call chains. This leads to
a rather ugly passing of plane groups all over the place.
It was incomplete, because it generally failed to pass the escorts.
And the whole scheme broke down for the pin-bombing command. That's
because pin-bombing asks the player for targets while his planes are
loitering above the target sector. This yields the processor and lets
other code run. Which does not get the flying planes passed.
The new code marks planes and SAMs (but not other missiles) flying a
sortie with flag PLN_LAUNCHED (the previous commit laid the groundwork
for that), and does away with passing around groups of flying planes.
This fixes the following bugs:
* Many commands could interact with foreign planes flying for a
pin-bombing command as if they were sitting in their base. This
includes spying, damaging, capturing, loading, or upgrading them,
and even getting intercepted by them. Any changes to those planes
were wiped out when they landed. Abusable.
* The bomb command could bomb its own escorts, directly (pin-bomb
planes) or through collateral damage, strategic sector damage,
collapsing bridges or nuke damage. The damage to the escorts was
wiped out when they landed.
* If you asked for a plane to fly both in the primary group and the
escort group, you got charged fuel for two sorties instead of one.
* pln_put1() and pln_put() now recognize planes that didn't take off,
and refrain from making them land. Intercept (since commit
c64e2149) and air defense can do that. Making them land had no
ill-effects, but it was still wrong.
There's one new problem: if PLN_LAUNCHED doesn't get reset properly,
due to game crash during flight or some other bug, the plane gets
stuck in the air. Catch and fix that on game start in ef_verify().
other. Ensure headers in include/ can be included in any order
(except for econfig-spec.h, which is special). New header types.h to
help avoid inclusion cycles. Sort include directives. Remove some
superflous includes.
flight path prompt now works.
(reco): Pass P_ESC to pln_arm() for consistency with call of pln_sel()
and similar code elsewhere. Believed not to make a difference.
(fly, reco): Use it to prevent flying to a carrier that doesn't have
space for the planes. Previously, planes that did this were
teleported home, which could be abused.
(fly): Fail if pln_sel() comes up empty, just like the other commands
to fly planes.
