We can make actual = roundavg(material_consume * prodeff) products.
When we reduce actual, we have to reduce material_consume, too. Code
does that like this:
material_consume = roundavg(actual' * material_consume / actual)
Double rounding. Do this instead:
material_consume = roundavg(actual' / prodeff)
Broken in commit 3a7d7fa, which enlarged struct natstr member
nat_hostaddr[] from 32 to 46 characters, but neglected to update the
ca_len in nat_ca[]. Consequently, the address is truncated in xdump.
Can also break country * ?ip=... and such, but that's exotic.
emp_server and empdump refuse to start on most big endian hosts,
because ef_verify_config() chokes on mdchr_ca[]:
Config meta uid 0 field type: value 0 is not in symbol table meta-type
Config meta uid 1 field type: value 0 is not in symbol table meta-type
Config meta uid 2 field type: value 0 is not in symbol table meta-type
Config meta uid 3 field type: value 0 is not in symbol table meta-type
Config meta uid 4 field type: value 0 is not in symbol table meta-type
Broken in commit 06a0036 (v4.3.12), which changed struct castr member
ca_type from packed_nsc_type (typedef'ed to char) to enum nsc_type,
but neglected to update the ca_type in mdchr_ca[].
On little endian hosts, the selector reads the least significant byte,
with sign extension. Happens to work, because the type values are all
sufficiently small integers.
On big endian hosts, the selector reads the most signiciant byte.
which is always zero (NSC_NOTYPE). Makes ef_verify_config() fail.
Except when sizeof(enum nsc_notype) == 1. Then selector type works
fine, and ef_verify_config() succeeds, but we run into the next
problem: the same commit also changed member ca_flags from nsc_flags
(typedef'ed to unsigned char) to int without updating the ca_type in
mdchr_ca[]. This breaks "only" xdump meta column flags.
v4.3.12 was released in April 2008. Either nobody has tried to run a
game on a big endian host since, or all who did gave up quietly,
without reporting the problem.
We clearly need to test on a wider range of machines.
Broken in commit 14ea670 (v4.3.8), which changed struct trdstr member
trd_type from char to short, but neglected to update the ca_type in
trade_ca[].
On little endian hosts, the selector reads the least significant byte,
with sign extension. Happens to work, because the type values are all
sufficiently small integers.
On big endian hosts, the selector reads the most signiciant byte,
which is always zero (EF_SECTOR). Messes up xdump trade badly.
Broken in commit 09248d0 (v4.3.8), which changed struct loststr member
lost_type from char to short, but neglected to update the ca_type in
lost_ca[].
On little endian hosts, the selector reads the least significant byte,
with sign extension. Happens to work, because the type values are all
sufficiently small integers.
On big endian hosts, the selector reads the most signiciant byte,
which is always zero (EF_SECTOR). Messes up xdump lost badly. Also
breaks lost * ?type=..., but that's exotic.
"Unusually long" topics are marked with a "!" in subject indexes.
This should use the line count of the formatted page, but that's too
much trouble, so commit 4c0b4c0 (v4.3.27) approximated it by "source
file has more than 9999 bytes". Change that to "source file has more
than 300 lines".
Since subjects were added in Empire 2, we've always picked them up
from .SA requests. If you mistype a subject there, you get a "is a
NEW subject" warning, and incorrect subject pages. When building a
pristine tree, you get bogus "is a NEW subject" warnings for all
subjects. If you somehow delete the generated subjects.mk, but not
the generated subject files, the build breaks.
Declare subjects in Make variable subjects. Drop generated makefile
subject.mk.
Treat unknown topics in .SA arguments as errors. This replaces the
"$subj is a NEW subject" warning.
Treat subjects without member pages as errors. This replaces the "The
subject $subj has been removed" warning.
Safer and simpler.
We used to do all the info indexing work in info.pl: find subjects,
create subjects.mk (to tell make the list of subjects), the subject
pages, and TOP.t. Worked, but touching an info page triggered a full
rebuild of all subject pages and TOP.t.
Commit 2f14064 (v4.3.0) tried to avoid that by splitting info.pl into
findsubj.pl, mksubj.pl, mktop.pl. findsubj.pl puts not just the
subjects into subjects.mk, but also make rules for the subject pages,
to guide their remaking. mksubj.pl creates a single subject page.
mktop.pl creates TOP.t.
Unfortunately, this doesn't work so well. Since subjects.mk doesn't
exist in a virgin tree, we use -include. Unwanted consequence:
findsubj.pl failure doesn't stop make. Moreover, the complex make
machinery breaks down when info sources get removed or subjects get
dropped.
Go back to the old method, except keep mktop.pl separate, as that part
works just fine, and use simpler make rules. mksubj.pl now creates
subjects.mk and all subject pages, like info.pl did.
This effectively reverts most of commit 2f14064. I'll address the
excessive rebuilding of subject pages in a different way shortly.
Remaking config.h and config.h.in updates the target only when its
contents actually changes. This is important, because after updating
config.h we need to recompile everything.
The make rules to do that are straight from the Autoconf manual. But
they don't work: the rules that connect config.h and config.h.in to
stamp-h and stamp-h.in don't have recipes. Since make doesn't have an
implicit rule either, it concludes that the target remains unchanged.
It still updates the prerequisites. The recipe for updating the stamp
files then change the the targetes behind make's back. Make misses
the change of config.h and/or config.h.in, and we get an incomplete
rebuild.
The rules need empty recipes instead. This Autoconf manual was fixed
accordingly in autoconf.git commit 6b42b38.
Mark obsolete pages with '+' in subject pages. Drop the separate
"Obsolete" subject page: move "info Innards" to subject "Server", and
"info update" to "Updates" (where it came from in commit a5764534,
v4.3.10).
For instance, use "127.0.0.1" for IPv4 loopback instead of
"::ffff:127.0.0.1".
Simplifies use of econfig key privip: plain dotted decimal now just
works regardless of IPv6 use, no need to add the IPv4-mapped form.
Also affects how addresses are logged and shown to players, and nation
selector ip. Nicer that way.
Systems using GNU libc such as Linux are frequently configured in a
way getaddrinfo(NULL, ...) put the IPv4 wildcard "0.0.0.0" *before*
the IPv6 wildcard "::" in the result. Because of that, listen_addr ""
listens only on all IPv4 addresses. Workaround: listen_addr "::".
Document it in listen_addr's doc string.
OpenBSD refuses to implement IPV6_V6ONLY, in violation of RFC 3493.
RFC 4038 frowningly recognizes this practice. The only way to bind
both IPv4 and IPv4 there is two separate sockets. Requires more
surgery than I can do now.
Since we can't have both IPv6 and IPv6 on OpenBSD with our single
socket, prefer IPv4, but if that doesn't work, do IPv6.
To prefer IPv6 instead, put 'listen_addr "::"' into econfig. Document
that in listen_addr's doc string.
We rely on AF_INET6 wildcard bind() binding the AF_INET port, too,
i.e. IPV6_V6ONLY off. This should be the default according to RFC
3493 section 5.3, but isn't on Windows and BSD. RFC 4038 recognizes
this fact in section 4.2.
When IPV6_V6ONLY is on, an AF_INET6 wildcard bind only accepts
connections from IPv6 addresses. Thus, IPv4 doesn't work when
getaddrinfo() returns an AF_INET6 address first (which it should do
when the system has an IPv6 address configured).
Switch off IPV6_V6ONLY explicitly instead of relying on the default.
This makes IPv6 work on systems where IPV6_V6ONLY is on by default,
such as Windows and BSD.
Except for OpenBSD, which does not support switching it off. To be
addressed in the next commit.
Shouldn't fail. If it fails, but bind() works, the failure doesn't
matter. If bind() fails, we can just as well report that failure
instead of setsockopt()'s.
How qsort() sorts members that compare equal is unspecified. Can
upset the smoke test. Observed under FreeBSD 8.3.
Break ties in power by comparing country numbers. Countries equal in
power are now sorted by increasing country number.
Island size is randomly chosen from the interval [1..2*is+1], with
expected value is. Use two dice to roll the size instead of one.
This makes extreme sizes much less likely.
The smoke test waits for the server completing startup by trying to
connect until it works. Hangs if the server doesn't complete startup
for some reason. Make it give up after 5s.
Likewise, The smoke test waits for the server to terminate by trying
kill -0 until it fails. Hangs if the server doesn't terminate. Make
it give up after 5s.
Lots stay on the market until there's a bid and bidding time expires.
When the highest bidder changes, and less than five minutes of bidding
time are left, it gets extended by five minutes (since 4.0.7, actually
works since 4.0.9).
Normally, this ensures that the competition has at least five minutes
to react. Except when this is the first bid, bidding time may have
expired already. If it expired less than five minutes ago, the
competition still gets time to react, just less than it should. If it
expired earlier, the sale is executed immediately for units. For
commodities, the bidding time is set to expire in five minutes (since
4.2.0).
Instead of extending bidding time by five minutes, set it to expire in
five minutes, both for commodities and for units.
check_trade() converts the price to float, which can lose precision,
although only for ridiculously high prices. Has been broken since
4.0.0 introduced the market.
Avoid the conversion. Bulletins now show pre-tax price as $N instead
of $N.00.
